Our FeedThru Capacitors provide better EMI performance than SMD component due to lower inductance, which results in broader frequency response for :
- Low speed signal lines
- Medium current power lines
- RF Immunity filter and amplifier gain filter
ELECTRICAL CHARACTERISTICS :
at + 25°C unless otherwise specified
OPERATING TEMPERATURE :
- 55°C, + 125°C
TEMPERATURE COEFFICIENT :
NP0 : ± 30ppm
X7R : ± 15% with 0Vdc applied
AGING RATE :
X7R : 2% per decade
Dissipation Factor :
NP0 : ≤ 1.10-3 at 1Vrms and 1MHz for values ≤ 1000pF
≤ 1.10-3 at 1Vrms and 1KHz for values > 1000pF
X7R : ≤ 0.025 at 1kHz
INSULATION RESISTANCE (IR) :
25°C/Un 105 MOhm or 1000 Ohm-Farad whichever is less
125°C/Un 104 MOhm or 100 Ohm-Farad whichever is less
DIELECTRIC STRENGTH TEST :
2.5Un U≤200V | U+250V 200 for 5s with 50mA max charging current
|
MCF |
0805 |
Y |
103 |
K |
A |
X |
- |
B |
- |
|
SERIES |
SIZE |
DIELECTRIC |
CAPACITANCE |
TOLERANCE |
VOLTAGE |
TERMINATION |
CURRENT |
PACKAGING |
SPECIAL |
|
MCF |
0603 0805 1206 1806 1812 2220 |
A = NP0 Y = X7R |
Expressed in picofarads (pF). The first two digits are significant, the third digit give the number of noughts. Example : 102 = 1 000pF |
J = ± 5% K = ± 10% M = ± 20% |
A = 50V B = 100V C = 200V E = 500V G = 1000V |
X = Nickel Tin F = Palladium-Silver P = Polymer Tin (Flex) C = Copper Tin (Non magnetic) W = Nickel Gold |
- 1 2 |
B = Reel V = Bulk |
- Dxx = Reliabilty spec Exx = Sorting spec |
Cross References
.jpg)