ELECTRICAL CHARACTERISTICS :
at + 25°C unless otherwise specified
OPERATING TEMPERATURE :
- 55°C, + 125°C
TEMPERATURE COEFFICIENT :
NPO : ± 30ppm
N2T : -2200 ± 350 ppm/C°
X7R : ± 15% with 0Vdc applied
BX : +15% - 25% under Un
2C1 : +20% - 30% under Un
DISSIPATION FACTOR:
NP0 : ≤ 1.10-3 at 1Vrms and 1MHz for values ≤ 1000pF
≤ 1.10-3 at 1Vrms and 1KHz for values > 1000pF
N2T : ≤ 1.10-3 at 1Vrms and 1MHz for values ≤ 1000pF
≤ 1.10-3 at 1Vrms and 1KHz for values > 1000pF
X7R : ≤ 0.025 at 1kHz for C ≥ 100pF
BX : 2,5% max
2C1 : 2,5% max
INSULATION RESISTANCE (IR) :
25°C/Un 105 MOhm or 1000 Ohm-Farad whichever is less
125°C/Un 104 MOhm or 100 Ohm-Farad whichever is less
DIELECTRIC STRENGTH TEST :
1.2Un for 5s with 50mA max charging current
BURN IN :
48 hours 125°C 2Un if Un<500V and 1.5 Un if Un >500V
|
SRMC |
41 |
Y |
102 |
J |
A |
C |
E |
B |
- |
|
SERIES |
SIZE |
DIELECTRIC |
CAPACITANCE |
TOLERANCE |
VOLTAGE |
TERMINATION |
COATING |
PACKAGING |
SPECIAL |
|
SRMC |
31 to 96 |
A = NP0 P = N2T X = BX Y=X7R BY=2C1 |
Expressed in picofarads (pF). The first two digits are significant, the third digit give the number of noughts. Example : 102 = 1 000pF |
A = ±0.05pF if < 10pF and 0.05% if > 10pF B = ± 0.1pF C = ± 0,25pF |
X = 25V A = 50V B = 100V C = 200V E = 500V G = 1000V |
- : Sn C : Non magnetic |
- = Varnished Coatng H = EpoxyCoating |
B = Reel V = Bulk |
- BM = BME Dxx = Reliabilty spec Exx = Sorting spec |
.jpg)